What’s needed
- Know your Wi-Fi network and password
- Make sure your mobile device is running iOS® 14 or higher or Android™ 10 or higher
- Make sure you’re connecting to a 2.4GHz Wi-Fi network (Merkury Smart cannot connect to 5GHz networks)
Step 1 Tap on the Merkury Plug-Tile
Step 2 Tap on the Settings icon in the top right of the screen
Step 3 From the device status tap on “Re-Pair” (will only see re-pair option if device is offline)
Step 4 Select “Steps to reset device”
Step 5 Confirm the device is powered on and select next
Step 6 Press and hold the reset button for five seconds to reset it. Confirm that the indicator light is flashing, if not repeat this step. Tap Next.
Step 7 iOS users will see a pop-up to join the network, select Join
Android users may or may not see a pop-up to select the network that begins with
Merkury-xxxx. When you see the pop-up, tap on the Merkury Smart Plug network.
The screen will then be followed by three screens (Shown below) as the device is connecting to the network
Step 8 Select Continue on the Device paired! Screen.
Step 9 Name your LED Strip or select a preset name to be displayed on the Home Screen,
then select next.
Step 10 Select Continue on the Congratulations! Screen.
Step 11 Select Okay on the Updating your device screen to return to the home screen.
You’re all set! Your Merkury Smart Plug is now re-paired!